OPTIMUS NO48 SWEDEN Vintage Stove (Burner) with Case
OPTIMUS NO48 SWEDEN Vintage Stove (Burner) with Case
Regular price
¥31,350
Regular price
Sale price
¥31,350
Unit price
per
Tax included.
Shipping calculated at checkout.
Out of stock
Couldn't load pickup availability
This Swedish-made Optimus stove (burner) can be used for boiling water and cooking. It uses kerosene as fuel. The trivet has an outer diameter of just under 20cm, so it can stably hold not only kettles but also fairly large pots and pans.
It wasn't unusable to begin with, but the flame was unstable, so I replaced the pump cup, replaced the gasket under the preheating plate, and cleaned the inside of the burner head tube and nipple. Now the flame is stronger and more stable.
There is some dullness on the surface of the main body and some rust on the trivet and tripod, but no damage that would interfere with use. It has been cleaned but not polished.
How to use it is as follows:
Add kerosene▼
Fill the preheating tray with fuel alcohol and ignite (preheat)
▼
When the fuel alcohol is low, close the air screw and pump.
If a strong flame comes out of the head, it's OK. If the flame weakens, pump again.
If you pump before the head is warm, fuel will spray out, causing flames and soot. In this case, blow out the flame, preheat the engine again, and then try pumping again.
The recommended preheating time is usually 3 to 4 minutes, but if the temperature is low, add more alcohol and preheat slowly.
It comes with a dedicated case, instruction manual, needle cleaner, etc. The tripod is detachable, and if you remove the preheating plate and burner head, they can be stored in the included case.
size
Trivet outer diameter: 19.8cm, trivet inner diameter: 7.4cm, height: 20cm
Delivery
80 size
Note
As this is a delicate item, it cannot be shipped together with anything other than small items and fabrics.
Related Categories
Interior , stove , outdoor
View full details
It wasn't unusable to begin with, but the flame was unstable, so I replaced the pump cup, replaced the gasket under the preheating plate, and cleaned the inside of the burner head tube and nipple. Now the flame is stronger and more stable.
There is some dullness on the surface of the main body and some rust on the trivet and tripod, but no damage that would interfere with use. It has been cleaned but not polished.
How to use it is as follows:
Add kerosene▼
Fill the preheating tray with fuel alcohol and ignite (preheat)
▼
When the fuel alcohol is low, close the air screw and pump.
If a strong flame comes out of the head, it's OK. If the flame weakens, pump again.
If you pump before the head is warm, fuel will spray out, causing flames and soot. In this case, blow out the flame, preheat the engine again, and then try pumping again.
The recommended preheating time is usually 3 to 4 minutes, but if the temperature is low, add more alcohol and preheat slowly.
It comes with a dedicated case, instruction manual, needle cleaner, etc. The tripod is detachable, and if you remove the preheating plate and burner head, they can be stored in the included case.
size
Trivet outer diameter: 19.8cm, trivet inner diameter: 7.4cm, height: 20cm
Delivery
80 size
Note
As this is a delicate item, it cannot be shipped together with anything other than small items and fabrics.
Related Categories
Interior , stove , outdoor
